Performance Analysis of a Microcontroller-Based Overvoltage and Overcurrent Protection System
DOI:
https://doi.org/10.69955/ajoeee.2025.v5i1.77Keywords:
Microcontroller, Static Relay, Fault protectionAbstract
A microcontroller-based over-voltage and over-current monitoring and protection system has been developed to enhance the safety and reliability of electrical systems by automatically disconnecting the circuit under fault conditions. The system integrates a PIC18F2550 microcontroller, relay switches, transistors, current transformers (CT), potential transformers (PT), and other discrete components, with a Windows-based graphical user interface (GUI) programmed in Visual Basic and USB communication for real-time monitoring and control. The microcontroller processes voltage and current signals from the CT and PT, compares them against predefined threshold values, and activates the relay driver through a transistor when an over-voltage or over-current condition is detected, disconnecting the circuit after a brief delay to prevent damage. Experimental results validate the system's effectiveness; for example, it successfully triggered protection at 4.7 A against a 4.5 A current threshold and at 214 V against a 210 V voltage threshold. Various test scenarios confirmed the system’s reliability in identifying and responding to fault conditions. Compared to recent research, the proposed design demonstrates improved performance in detection speed, operational accuracy, and system simplicity, offering a robust and cost-effective solution for modern electrical protection needs.
Metrics
Downloads
References
[1] H. Rezaie and M. H. Kazemi-Rahbar, "Enhancing voltage stability and LVRT capability of a wind-integrated power system using a fuzzy-based SVC," Engineering Science and Technology, an International Journal, vol. 22, no. 3, pp. 827-839, 2019. https://doi.org/10.1016/j.jestch.2018.12.018 DOI: https://doi.org/10.1016/j.jestch.2018.12.018
[2] S. Aslam, A. Altaweel, and A. B. Nassif, "Optimization Algorithms in Smart Grids: A Systematic Literature Review," 2023, [Online]. Available: http://arxiv.org/abs/2301.07512
[3] S. M. Salam, N. Mohammad, and F. Hossain, "A new approach to Analysis the Impact of Demand Side Management for Temperature Control Load Consideration in a Test Bus System," 2021 5th International Conference on Electrical Information and Communication Technology, EICT 2021, 2021.https://doi.org/10.1109/EICT54103.2021.9733717 DOI: https://doi.org/10.1109/EICT54103.2021.9733717
[4] K. Majumdar, P. K. Roy, and S. Banerjee, "Framework of hybrid renewable energy with conventional power generation scheduling using novel metaheuristic optimization algorithm," International Journal of Power and Energy Systems, vol. 42, no. 10, 2022. https://doi.org/10.2316/J.2022.203-0387 DOI: https://doi.org/10.2316/J.2022.203-0387
[5] M. M. Rashid, S. M. Salam, M. Y. Ali, and S. Yvette, "Flywheel energy storage for peak shaving and load balancing in power grids," in proceedings of 5th international conference on sustainable innovation in engineering and technology 2023, AIP publishing, Aug. 2024, p. 020127. https://doi.org/10.1063/5.0229871 DOI: https://doi.org/10.1063/5.0229871
[6] B. F. W. Allen J. Wood, Power Generation, Operation, and Control . John Wiley & Sons, Inc, 1996.
[7] S. M. Salam and N. Mohammad, "Analyze the Impact of Demand Side Management on Grid Power for an Isolate Zone in a Sustainable IEEE 14 Bus System," in 2021 International Conference on Information and Communication Technology for Sustainable Development, ICICT4SD 2021 - Proceedings, 2021, pp. 16-20. https://doi.org/10.1109/ICICT4SD50815.2021.9396975 DOI: https://doi.org/10.1109/ICICT4SD50815.2021.9396975
[8] C. Brusil, H. Arcos, F. Espín and C. Velásquez, "Analysis of Harmonic Distortion of LED Luminaires Connected to Utility Grid," 2020 IEEE ANDESCON, Quito, Ecuador, 2020, pp. 1-6. https://doi.org/10.1109/ANDESCON50619.2020.9272004 DOI: https://doi.org/10.1109/ANDESCON50619.2020.9272004
[9] A. Powers and M. Saad, "Building Energy Use: Modeling and Analysis of Lighting Systems-A Case Study," Sustainability, vol. 14, no. 20, p. 13181, Oct. 2022. https://doi.org/10.3390/su142013181 DOI: https://doi.org/10.3390/su142013181
[10] S. M. Salam, M. M. Rashid, M. Y. Ali, and S. Yvette, "Performance analysis of an efficient buck boost converter," AIP Conference Proceedings, 2024, Vol. 3161, No. 1, p. 020128. https://doi.org/10.1063/5.0229872 DOI: https://doi.org/10.1063/5.0229872
[11] O. S. Alegu, M. Ezike, D. A. Amoke, and C. Ogbuka, "Design and Construction of a Microcontroller-Based Overcurrent Protection Scheme for Power Transformers With IOT Interface," 2025.
[12] R. Masood Larik, S. Aqeel Haider, K. Attaullah Balochistan, and A. Amjad, "Over-Voltage Protection Circuit for Tripping & Switching of 220V Appliances Using Relay Module," 2025. [Online]. Available: https://www.researchgate.net/publication/390494867
Downloads
Published
Issue
Section
License
Copyright (c) 2025 AlamBiblilo Publishers
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The Asian Journal of Electrical and Electronic Engineering journal is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
